The San Andreas Fault is a continental transform fault that extends roughly 1,200 kilometers (750 mi) through California.[1] It forms the tectonic boundary between the Pacific Plate and the North American Plate, and its motion is right-lateral strike-slip (horizontal). The fault divides into three segments, each with different characteristics and a different degree of earthquake risk. The slip rate along the fault ranges from 20 to 35 mm (0.79 to 1.38 in) per year.[1] It was formed by a transform boundary.
QUAKE II crack english
The fault was identified in 1895 by Professor Andrew Lawson of UC Berkeley, who discovered the northern zone. It is often described as having been named after San Andreas Lake, a small body of water that was formed in a valley between the two plates. However, according to some of his reports from 1895 and 1908, Lawson actually named it after the surrounding San Andreas Valley.[2] Following the 1906 San Francisco earthquake, Lawson concluded that the fault extended all the way into southern California. In 1953, geologist Thomas Dibblee concluded that hundreds of miles of lateral movement could occur along the fault.
The northern segment of the fault runs from Hollister, through the Santa Cruz Mountains, epicenter of the 1989 Loma Prieta earthquake, then up the San Francisco Peninsula, where it was first identified by Professor Lawson in 1895, then offshore at Daly City near Mussel Rock. This is the approximate location of the epicenter of the 1906 San Francisco earthquake. The fault returns onshore at Bolinas Lagoon just north of Stinson Beach in Marin County. It returns underwater through the linear trough of Tomales Bay which separates the Point Reyes Peninsula from the mainland, runs just east of Bodega Head through Bodega Bay and back underwater, returning onshore at Fort Ross. (In this region around the San Francisco Bay Area several significant "sister faults" run more-or-less parallel, and each of these can create significantly destructive earthquakes.) From Fort Ross, the northern segment continues overland, forming in part a linear valley through which the Gualala River flows. It goes back offshore at Point Arena. After that, it runs underwater along the coast until it nears Cape Mendocino, where it begins to bend to the west, terminating at the Mendocino Triple Junction.
The central segment of the San Andreas Fault runs in a northwestern direction from Parkfield to Hollister. While the southern section of the fault and the parts through Parkfield experience earthquakes, the rest of the central section of the fault exhibits a phenomenon called aseismic creep, where the fault slips continuously without causing earthquakes. It was formed by a transform boundary.[4]
The southern segment, which stretches from Parkfield in Monterey County all the way to the Salton Sea, is capable of an 8.1-magnitude earthquake. At its closest, this fault passes about 35 miles (56 km) to the northeast of Los Angeles. Such a large earthquake on this southern segment would kill thousands of people in Los Angeles, San Bernardino, Riverside, and surrounding areas, and cause hundreds of billions of dollars in damage.[6]
The southwestward motion of the North American Plate towards the Pacific is creating compressional forces along the eastern side of the fault. The effect is expressed as the Coast Ranges. The northwest movement of the Pacific Plate is also creating significant compressional forces which are especially pronounced where the North American Plate has forced the San Andreas to jog westward. This has led to the formation of the Transverse Ranges in Southern California, and to a lesser but still significant extent, the Santa Cruz Mountains (the location of the Loma Prieta earthquake in 1989).
The fault was first identified in Northern California by UC Berkeley geology professor Andrew Lawson in 1895 and named by him after the Laguna de San Andreas, a small lake which lies in a linear valley formed by the fault just south of San Francisco. Eleven years later, Lawson discovered that the San Andreas Fault stretched southward into southern California after reviewing the effects of the 1906 San Francisco earthquake. Large-scale (hundreds of miles) lateral movement along the fault was first proposed in a 1953 paper by geologists Mason Hill and Thomas Dibblee. This idea, which was considered radical at the time, has since been vindicated by modern plate tectonics.[13]
Seismologists discovered that the San Andreas Fault near Parkfield in central California consistently produces a magnitude 6.0 earthquake approximately once every 22 years. Following recorded seismic events in 1857, 1881, 1901, 1922, 1934, and 1966, scientists predicted that another earthquake should occur in Parkfield in 1993. It eventually occurred in 2004. Due to the frequency of predictable activity, Parkfield has become one of the most important areas in the world for large earthquake research.
In 2004, work began just north of Parkfield on the San Andreas Fault Observatory at Depth (SAFOD). The goal of SAFOD is to drill a hole nearly 3 kilometres (1.9 mi) into the Earth's crust and into the San Andreas Fault. An array of sensors will be installed to record earthquakes that happen near this area.[14]
All these data suggest that the fault is ready for the next big earthquake but exactly when the triggering will happen and when the earthquake will occur we cannot tell. It could be tomorrow or it could be 10 years or more from now.[17]
Nevertheless, in the 16 years since that publication there has not been a substantial quake in the Los Angeles area, and two major reports issued by the U.S. Geological Survey (USGS) have made variable predictions as to the risk of future seismic events. The ability to predict major earthquakes with sufficient precision to warrant increased precautions has remained elusive.[19]
The U.S. Geological Survey most recent forecast, known as UCERF3 (Uniform California Earthquake Rupture Forecast 3), released in November 2013, estimated that an earthquake of magnitude 6.7 M or greater (i.e. equal to or greater than the 1994 Northridge earthquake) occurs about once every 6.7 years statewide. The same report also estimated there is a 7% probability that an earthquake of magnitude 8.0 or greater will occur in the next 30 years somewhere along the San Andreas Fault.[20][failed verification] A different USGS study in 2008 tried to assess the physical, social and economic consequences of a major earthquake in southern California. That study predicted that a magnitude 7.8 earthquake along the southern San Andreas Fault could cause about 1,800 deaths and $213 billion in damage.[21]
A 2008 paper, studying past earthquakes along the Pacific coastal zone, found a correlation in time between seismic events on the northern San Andreas Fault and the southern part of the Cascadia subduction zone (which stretches from Vancouver Island to northern California). Scientists believe quakes on the Cascadia subduction zone may have triggered most of the major quakes on the northern San Andreas within the past 3,000 years. The evidence also shows the rupture direction going from north to south in each of these time-correlated events. However the 1906 San Francisco earthquake seems to have been the exception to this correlation because the plate movement was mostly from south to north and it was not preceded by a major quake in the Cascadia zone.[22]
When Blackbeard took this Devil Fruit's power through an unknown method, he claimed that with the power of quakes which "brings destruction to all" combined with the darkness that "reduces anything to nothingness", he was truly invincible and the strongest.[19]
However, this Devil Fruit's powers are noted to be a hazard to both friend and foe alike, as observed by both the Whitebeard[20] and Blackbeard Pirates.[21] This primarily stems from how, even though the user seems to be able to control both the magnitude of the shock wave and its point of impact,[13][10] the quakes produced by these shock waves are indiscriminate in their effects.[18] Because of this, allies of the user must be prepared for the impacts unless they want to become unintended victims of them.[20]
Years ago, all magnitude scales were based on the recorded waveform lengths or the length of a seismic wave from one peak to the next. But for very large earthquakes, some magnitudes underestimated the true earthquake size. Now, scientists use earthquake measurements that describe the physical effects of an earthquake rather than measurements based only on the height of a waveform recording.
When the Earth trembles, earthquakes spread energy in the form of seismic waves. A seismograph is the primary earthquake measuring instrument. The seismograph produces a digital graphic recording of the ground motion caused by the seismic waves. The digital recording is called a seismogram.
An earthquake has one magnitude unit. The magnitude does not depend on the location where measurement is made. Since 1970, the Moment Magnitude Scale has been used because it supports earthquake detection all over the Earth.
The Richter Scale was replaced because it worked largely for earthquakes in Southern California, and only those occurring within about 370 miles of seismometers. In addition, the scale was calculated for only one type of earthquake wave. It was replaced with the Moment Magnitude Scale, which records all the different seismic waves from an earthquake to seismographs across the world.
Today, earthquake magnitude measurement is based on the Moment Magnitude Scale (MMS). MMS measures the movement of rock along the fault. It accurately measures larger earthquakes, which can last for minutes, affect a much larger area, and cause more damage.
The Modified Mercalli (MM) Intensity Scale is used in the United States. Based on Giuseppe Mercalli's Mercalli intensity scale of 1902, the modified 1931 scale is composed of increasing levels of intensity that range from observable quake impacts from light shaking to catastrophic destruction. Intensity is reported by Roman numerals. 2ff7e9595c
Comments